How to Connect Your Dexcom G7 to Levels

This article will walk you through a step-by-step process for setting up your Dexcom G7 app and connecting it to the Levels app. If you purchased your Dexcom sensors from Levels, continue below. If you're bringing your own Dexcom sensors, please follow the instructions on How To Connect Your Dexcom G7 to Levels For Sensors Obtained Elsewhere

🚨 Do not set up your Dexcom G7 while traveling outside of the United States

For regulatory reasons, during initial setup, the Dexcom G7 app verifies that the country you are in matches the country of residence in your account. Setup will not proceed if you attempt to apply your first sensor while traveling. More details here.


Step 1: 📲 Download the Dexcom G7 and the Levels apps

Dexcom G7 App

The Dexcom app reads your CGM and sends that data to your phone. Download the Dexcom G7 app on your phone:

  1. iPhone users: CLICK HERE to download it.
  2. Android users: CLICK HERE to download it.

Levels -
Metabolic Health App

Levels - Metabolic Health is our primary app. You'll use the Levels app to log your meals and exercise, and view your data & insights. Download the Levels - Metabolic Health app on your phone:

  1. iPhone users: CLICK HERE to download it.
  2. Android users: CLICK HERE to download it.

Step 2: 👤 Log into the Dexcom G7 app

  • If you are creating a new account, it's recommended that you register using the email address you used on your Levels account. We do not recommend using your mobile phone number as your user ID.
  • If you have an existing account, log in with your existing credentials.


Step 3: 📱 Follow the Dexcom G7 app walkthrough

  • The Dexcom G7 app will walk you through the step-by-step instructions directly from the app to apply your G7 sensor, connect your sensor to your phone, and enable Bluetooth. You can also find instructional and safety inserts inside the CGM box. 

💪 Applying the Dexcom G7: 

  1. Review the instructions. Carefully review the instructional inserts provided in your CGM box. The smaller insert contains app and sensor instructions and the larger insert has essential usage information and tips. 
  2. Wash and dry your hands. Thoroughly wash and dry your hands. Use alcohol swabs to clean the application site and allow to dry. 
  3. Prep the sensor site. We recommend the fleshier part on the back of your upper arm between your deltoid and tricep, avoiding muscular areas. 
  4. Apply the sensor. Unscrew the sensor applicator and press and hold the applicator against your skin—you want to place the sensor in the fleshy area between your deltoid and tricep—then push the button and remove the applicator. 
  5. Apply Performance Cover. Apply the over patch provided by Dexcom and rub around the sensor 3 times and then press gently on the sensor for 10 seconds. Be sure to apply your Levels performance covers over the over patch to keep your sensor protected. ⚠️ Please note: Replacement CGMs are provided on a case by case basis at Levels. We provide performance covers to protect CGMs from day-to-day wear. If members choose not to wear the performance cover, your CGM may not stay securely adhered and a replacement may or may not be provided.

🤳🏼 Connecting the Dexcom G7 sensor to your phone: 

  1. Scan the 4-digit code. After you've applied the Dexcom G7 sensor, you'll be prompted by the Dexcom G7 app to enter or scan the 4-digit pairing code found on the Dexcom G7 applicator. 
  2. Warm-up period. After the 30-minute warm-up period, you'll begin to see glucose data enter the Dexcom G7 app. Avoid eating or intense exercise during the 30-minute warm-up period.

💡 Additional Tips:  

  • ⚠️ Turn off critical low alerts. We recommend turning off the critical low glucose alerts, as members using Levels are using it for health and wellness and not to manage a medical condition; click here for detailed instructions to disable critical low alarms. 
  • ⏱️ Apply the sensor at the right time. We recommend applying the sensor in the morning before eating or exercising while glucose is most stable. Avoid eating and exercise during the 25-30 minute warmup window. 

📺 To watch the Dexcom G7 Application video click this link here: Dexcom G7 Application Video


Step 4: 📶 Connect your Sensor in the Levels app

  • Once everything is set up on your Dexcom app, head to the Levels app → tap More → tap Devices → tap Manage.
  • Click Select Sensor Model
  • Select Dexcom G7 Dexcom Real-time access


Step 5: 🔄 Connect Dexcom Account with Levels

  • Once you have selected the correct sensor and connection type, you can return to the sensor configuration page by tapping the back arrow at the top left corner of the screen.
  • Tap Connect Dexcom Account
  • Log in with your Dexcom credentials

Setup Complete 🎉

Once you've logged in with your Dexcom credentials in the Levels app and your sensor is warmed up, you should see glucose data streaming through within about 10-15 minutes.

If you encounter any issues setting up your Dexcom <> Levels connectivity, email us at support@levels.com.
Did this article answer your question? Thanks for the feedback! There was a problem submitting your feedback. Please try again later.